Four Leg Table Case
Four Leg Table Case
Four leg table cases can be fabricated in a wide range of styles to complement your gallery or set off the case contents. They can be simple and sleek with a clean, modern look or made with the classic appearance of fine wood furniture. Vitrines are precision made with cast acrylic with strong, bubble-free polished joints.
Four Leg Table Case Options
Ultraviolet (UV) Filtering
Ultraviolet light can be extremely detrimental to sensitive artifacts. Special ultraviolet filtering acrylic is available. Laminated glass, consisting of two sheets of glass bonded to a center clear plastic sheet, has the option of incorporating a UV filtering center layer.
All decks are fabricated from a variety of non off-gassing materials. Conservation materials such as aluminum plate, acrylic, Dibond aluminum/polyethylene composite and Ethafoam are options. Acrylics and aluminum can be painted using zero VOC water based paints, laminated, or wrapped with fabric. Ethafoam, which is a high-density foam, can be bonded to an aluminum plate or Dibond sheet and fabric wrapped to provide flexibility in mounting artifacts. A variety of deck options are available including flat, raised, and sloped.
Risers
Risers give the curator or designer a way to highlight specific objects by elevating them above the deck. Risers may be constructed of a variety of archival materials to ensure they meet conservation requirements. They are available with a zero VOC paint finish or wrapped with museum grade linen fabric.
Gas Assist Springs
Gas assist springs make opening and closing easier and safer. Just like the struts on a car hatchback they take some of the weight of the hinged vitrine or glass and hold it open while working inside the case. Our gas assist springs include dampeners that slowly lower the open access to prevent injury.
Climate Control
In situations requiring a stable internal environment to preserve sensitive items such as paper, cloth and many other materials accommodations may be made for a passive system using desiccant material. Our cases are tightly sealed with silicone gaskets to minimize air exchange with the external environment.
Lighting
We use LED lighting that is dimmable, emits no UV rays, generates minimal heat, is energy efficient and long lasting. Light tubes are typical, but we can also provide other light sources suited to your needs. All of our lighting comes with dimmers that allow for precise control. Timers, proximity sensors and power cutoffs are also available.
Security
Depending on the style of case and your requirements we offer a range of security systems from simple screws requiring a special driver to high security key locks or other types of systems. Sensors and alarms may be added to cases and can interface with building security systems.
Glass Vitrines
Glass vitrines offer an alternative to the more common acrylic vitrines. Acrylic is lighter that glass and easier to handle, but subject to micro scratching if improperly cleaned. Glass may be tempered or laminated. Low iron glass is optically clear without the green cast of standard glass.
Finishes
A wide variety of finishes may be applied to case bases including paint, laminates or fine wood veneers. All of our paints are zero or low VOC and mixed to any custom color desired. High-pressure laminates are available from a number of different manufacturers. Cherry, oak, maple or other wood veneers add an elegant touch to a case.